Error code
Bosch error code E:10 / -00 / -10 / -20
Bosch error code E:10 / -00 / -10 / -20: the pump for the automatic detergent dosing system is blocked. What the code covers, what to check first, and what it does not tell you — on washers.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code E:10 / -00 / -10 / -20, from the manufacturer's own pages
A code is only meaningful together with the generation showing it — the same two digits mean different things across generations.
The code
E:10 / -00 / -10 / -20
The pump for the automatic detergent dosing system is blocked
or call (305) 783-3552
What it narrows down to
Dosing pump blocked
What you are probably seeing
Diagnostic
From $95, credited to the repair
What it looks like from the kitchen
The symptom this code usually arrives with
A code names the subsystem; the symptom is what sent you to look at the display in the first place. That page says what it usually turns out to be, cheapest cause first.
-
Door, power or supply Washer will not start
A machine that does nothing, or one that lights up and never fills. The door lock and the water supply account for most of it, and both are worth a minute before booking.
- No response at all
- Lights on but the cycle never begins
- Starts, then stops without filling
In more detail
About Bosch error code E:10 / -00 / -10 / -20
What this one means
The pump for the automatic detergent dosing system is blocked. It is a code the manufacturer publishes for this appliance, not one we have worked out — and it is decoded here rather than left as three characters on a display.
What the code covers
A published cause names a circuit rather than a component, which is the single most useful thing to know before ordering a part. This one covers:
- The dosing pump unit
- Detergent that has dried in it
What to try yourself
- Put the machine into standby and clean the dosing pump unit
- Consider switching the automatic dosing off temporarily so the machine can be used
Then what
Only the machines with automatic dosing have this. Thick detergents and long gaps between washes are what dry in the unit, and it can be turned off manually while it waits for a repair.
This code is published for washers. The full list of codes has the rest of them, searchable, including the labels older and newer machines use for the same conditions.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards