Error code
Bosch error code Drum cleaning reminder
Bosch error code Drum cleaning reminder: the machine is asking for a drum cleaning cycle. What the code covers, what to check first, and what it does not tell you — on washers.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code Drum cleaning reminder, from the manufacturer's own pages
A code is only meaningful together with the generation showing it — the same two digits mean different things across generations.
The code
Drum cleaning reminder
The machine is asking for a drum cleaning cycle
or call (305) 783-3552
What it narrows down to
Maintenance reminder
What you are probably seeing
Diagnostic
From $95, credited to the repair
What it looks like from the kitchen
The symptom this code usually arrives with
A code names the subsystem; the symptom is what sent you to look at the display in the first place. That page says what it usually turns out to be, cheapest cause first.
-
There is a filter you can open Washer not draining
A cycle that stops with water in the drum, or clothes left soaking because the machine never got to the spin. There is a pump filter behind a flap at the front of these machines, and almost nobody knows it is there.
- Cycle stops with water in the drum
- Will not spin because it has not drained
- A code beginning E:30 or E:36
In more detail
About Bosch error code Drum cleaning reminder
What this one means
The machine is asking for a drum cleaning cycle. It is a code the manufacturer publishes for this appliance, not one we have worked out — and it is decoded here rather than left as three characters on a display.
The other ways your machine may say it
The same condition is published under more than one label, because it has been carried across generations of this appliance:
- A drum with a water droplet icon is shown — how a model with no digital display says it. On that machine, the lights are the code
What the code covers
A published cause names a circuit rather than a component, which is the single most useful thing to know before ordering a part. This one covers:
- Routine maintenance rather than any problem
What to try yourself
- Run the drum cleaning or maintenance cycle with the drum empty
Then what
A reminder rather than a code, and worth acting on: a front-loading machine that is never run hot builds residue in the drum and the seal, which is where washer smells come from.
This code is published for washers. The full list of codes has the rest of them, searchable, including the labels older and newer machines use for the same conditions.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards