Error code
Bosch dishwasher error code E06
Bosch error code E06: the machine cannot confirm the door is closed. What the code covers, what to check first, and what it does not tell you — on dishwashers.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code E06, from the manufacturer's own pages
A code is only meaningful together with the generation showing it — the same two digits mean different things across generations.
What it narrows down to
Door sensor
What you are probably seeing
Diagnostic
From $95, credited to the repair
What it looks like from the kitchen
The symptom this code usually arrives with
A code names the subsystem; the symptom is what sent you to look at the display in the first place. That page says what it usually turns out to be, cheapest cause first.
-
Often the door, not the machine Dishwasher will not start
A machine that does nothing, starts and stops, or lights up and never fills. Door and power account for most of these, and both are worth checking before anything is booked.
- No lights at all
- Lights on but nothing happens
- Starts, then stops within a minute
In more detail
About Bosch dishwasher error code E06
What this one means
The machine cannot confirm the door is closed. It is a code the manufacturer publishes for this appliance, not one we have worked out — and it is decoded here rather than left as three characters on a display.
The other ways your machine may say it
The same condition is published under more than one label, because it has been carried across generations of this appliance:
- E06, E8000 — the same condition, on machines of different ages
- Clean light flashing — how a model with no digital display says it. On that machine, the lights are the code
What the code covers
A published cause names a circuit rather than a component, which is the single most useful thing to know before ordering a part. This one covers:
- The switch behind the latch
- The latch mechanism itself
- A door that genuinely is not shutting square
What to try yourself
- Push the door firmly until it clicks
- Check the lower rack is pushed fully in and no handle is fouling the door
- Look at whether the door sits level along the top edge
Then what
The machine will not fill without this confirmation, which is sensible in an appliance that holds water. Half of these are the door rather than the switch.
This code is published for dishwashers. The full list of codes has the rest of them, searchable, including the labels older and newer machines use for the same conditions.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards