Error code
Bosch error code F1
Bosch error code F1: the cooking zone got hot enough to threaten the work surface and switched itself off. What the code covers, what to check first, and what it does not tell you — on cooktops & rangetops and ranges.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code F1, from the manufacturer's own pages
A code is only meaningful together with the generation showing it — the same two digits mean different things across generations.
The code
F1
The cooking zone got hot enough to threaten the work surface and switched itself off
or call (305) 783-3552
What it narrows down to
Zone overheated
What you are probably seeing
Diagnostic
From $95, credited to the repair
What it looks like from the kitchen
The symptom this code usually arrives with
A code names the subsystem; the symptom is what sent you to look at the display in the first place. That page says what it usually turns out to be, cheapest cause first.
-
Usually protection working Cooktop zone switching itself off
A zone that cuts out under load, or a cooktop that shuts down after a while at high power. Almost every version of this is a protection doing its job, and each one has a published code that says which.
- Cuts out after twenty minutes on high
- All zones off at once
- Comes back after it cools
In more detail
About Bosch error code F1
What this one means
The cooking zone got hot enough to threaten the work surface and switched itself off. It is a code the manufacturer publishes for this appliance, not one we have worked out — and it is decoded here rather than left as three characters on a display.
The other ways your machine may say it
The same condition is published under more than one label, because it has been carried across generations of this appliance:
- F1, F6 — the same condition, on machines of different ages
What the code covers
A published cause names a circuit rather than a component, which is the single most useful thing to know before ordering a part. This one covers:
- The zone's own temperature protection
What to try yourself
- Wait for it to cool, then switch the zone back on and carry on cooking
- Note whether it happens on one particular zone every time
Then what
Protection, not a failure. If one zone does this repeatedly and the others never do, that zone's sensing is worth looking at — but the appliance is behaving correctly either way.
This code is published for cooktops & rangetops and ranges. The full list of codes has the rest of them, searchable, including the labels older and newer machines use for the same conditions.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards